E-flite Beechcraft Bonanza 15e ARF - Manual (Page 18)

18 Beechcraft Bonanza 15e ARF Assembly Manual
□
Step 11
Remove the servo and use a 1/16-inch drill bit in a
pin vise to drill the mounting holes.
□
Step 12
Apply a drop of thin CA to each hole to strengthen
the wood. Allow the CA to cure without using
accelerator.
□
Step 13
Use a #1 Phillips screwdriver and the screws
provided with the servo to install the steering servo
in the fuselage.
Nose Gear Installation
Parts Required
Fuselage Nose gear assembly
#4 x 7/16-inch countersunk wood screws (4)
Tools Required
Ruler #1 Phillips screwdriver
Pin vise 5/64-inch drill bit
Thin CA Pencil
Sidecutters
□
Step 1
Note that the holes in the base of the nose gear
are not spaced evenly. Use a ruler to check the
measurements, the 1 1/8-inch dimension mounts
from left to right across the rails.