Barco DX-700 User Manual
Page 99
DX-700 • User’s Guide • Rev 02
99
4. Operation
Using the Input Wizard
~
Use the Viewport Height slider to adjust the input’s vertical size.
~
If required, press {Restore} to return the source to its default values.
9.
Press {Next} to display the Wall Contrast Adjustment Menu.
Figure 4-32.
Input Wizard: Wall Contrast Adjustment Menu (sample)
The Wall Contrast Adjustment Menu enables you to set the wall contrast by
adjusting the white values.
~
Use the NIT Value slider to adjust the wall’s contrast.
~
Press {Apply} to update the wall with the new settings.
10.
Press {Next} to display the Wall Gamma Adjustment Menu.
Figure 4-33.
Input Wizard: Wall Gamma Adjustment Menu (sample)