Barco DX-700 - Manual (Page 147)

DX-700 • User’s Guide • Rev 02 147
4. Operation
DX-700 Management Menu Operations
3. Press {Factory Reset}. The following warning appears:
Figure 4-85. Factory Reset Warning
~ Press {Yes} to reset the system to factory default values and delete
saved presets. Upon completion, the Home Menu will appear.
~ Press {No} to cancel the procedure. The system remains at the System
Reset Menu
.
This completes the Factory Reset procedure.
Note Performing a factory reset updates the tile refresh rate to
59.94Hz, to match the DX-700’s refresh rate.