Metrohm 719 S Titrino - Manual (Page 65)

3.1 General rules
719 S Titrino
61
RS receive errors:
E36 Parity
Exit: and ensure settings of appropriate parameters at
both devices are the same.
E37 Stop Bit
Exit: and ensure settings of appropriate parameters at
both devices are the same.
E38 Overrun error. At least 1 character could not be read.
Exit:
E39 The internal working-off buffer of the Titrino is full (>82
characters).
Exit:
RS send errors:
E40 DSR=OFF No proper handshake for more than 1 s.
Exit: Is the receiver switched on and ready to receive?
E41 DCD=ON No proper handshake for more than 1 s.
Exit: Is the receiver switched on and ready to receive?
E42 CTS=OFF No proper handshake for more than 1 s.
Exit: Is the receiver switched on and ready to receive?
E43 The transmission of the Titrino has been interrupted with XOFF for
at least 6 s.
Exit: Send XON or
E44 The RS interface parameters are no longer the same for both
devices. Reset.
E45 The receive buffer of the Titrino contains an incomplete command
(L
F
missing). Sending from the Titrino is therefore blocked.
Exit: Send L
F
or .