Metrohm 719 S Titrino - Manual (Page 20)

2.4. Tutorial
719 S Titrino
16
2.4.3 Storage and loading of methods
Now store the method you have just developed in the method memory.
Storage of a method
2 × • Press repeatedly until the title
">store method" appears in the display.
• Open the inquiry with .
• Enter an identifier, e.g. 1 or Acid.
For text input see page 8.
The method now runs under the name "Acid". It is ready
to titrate.
If you have a printer connected, you can print out the contents of your method memory.
Key sequence: METH>
Stored methods can be loaded at any time.
Loading a method from the method memory
or direct entry • Press . The display shows the title ">recall method". • Open the inquiry
• You can select the desired method with
or
direct entry
• Press . The display shows the title
">recall method".
• Open the inquiry
• You can select the desired method with
(it shows all methods of the method memory one af-
ter the other) or by directly enter the method name.
• Load the method with
The method is ready to titrate.
user methods
>store method
>store method
method name: ********
SET pH Acid
user methods
>recall method
>recall method
method name: ********
SET pH Acid