Metrohm 743 Rancimat - Manual (Page 96)

4.7 Results ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
88 ￭￭￭￭￭￭￭￭ 743 Rancimat
Formatting the determination overview
Proceed as follows to format the determination overview.
A detailed description of the parameters can be found at "Parameter
description", page 95.
1 Select fields
￭ Click on the symbol or the menu item Format ▶ Select
fields.
The following dialog window appears:
Only those fields are shown in the determination overview which
are listed in the right column under Display.
￭ In the column Selection, click on a field which is to be displayed
in the determination overview.
￭ Click on the [>] button.
￭ In the column Display, click on a field which is not to be dis-
played in the determination overview.
￭ Click on the [<] button.
2 Adjust the column width
￭ Click in any cell of the column whose width is to be adjusted.
￭ Click on the menu item Format ▶ Adjust width.
The following dialog window appears: