Metrohm 743 Rancimat - Manual (Page 63)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Operation
743 Rancimat ￭￭￭￭￭￭￭￭ 55
Note
If the temperature which is defined in the method, has not yet
been reached, the heating is started automatically. At the same
time the message Waiting until temperature is reached...
appears in the message box.
As soon as the temperature defined in the method has been
reached, the message Measuring temperature. Please wait...
appears in the message box.
3 Accept measured values
￭ Click on the [Accept] button in order to accept the determined
temperature correction Delta T in the method.
This is followed by the message that Delta T is now set to the corre-
sponding method. It is automatically saved with the changed value
of Delta T.
4.5 Methods
4.5.1 Managing methods
Creating a new method
Proceed as follows to create a new method:
1 Open empty method
￭ In the Control window, click on the symbol or the menu
item File
▶ New method.
The following dialog window appears: