Metrohm 743 Rancimat - Manual (Page 93)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Operation
743 Rancimat ￭￭￭￭￭￭￭￭ 85
2 Adjust the parameters
￭ Adjust all required parameters (see Chapter 4.5.2.1, page 60).
￭ Confirm the changes with [OK].
4.6.7 Stopping the determination manually
Determinations are normally automatically stopped after reaching the stop
criteria defined in the method. Current determinations can also be stop-
ped manually.
1 Stop determination
￭ In the Control window, click on the button [Stop].
The message Do you want to save this determination? appears.
2 Save measured data and results
￭ Confirm the message with [Yes] to save all data of the determina-
tion.
￭ or confirm the message with [No] to reject all data.