Metrohm 743 Rancimat - Manual (Page 151)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Operation
743 Rancimat ￭￭￭￭￭￭￭￭ 143
The dialog window GLP properties for unit with serial no. x
appears.
2 Activate monitoring
￭ In the Temperature tab, activate the option Enable GLP moni-
toring.
￭ Carry out the remaining settings (see "Parameter description",
page 143) and confirm with [OK].
3 Deactivate monitoring
￭ Open the dialog window GLP properties for unit with serial
no. x (see step 1).
￭ In the required tab (Temperature, Conductivity, Gas flow),
deactivate the option Enable GLP monitoring and confirm with
[OK].
Parameter description
Enable GLP monitoring
on | off (Default value: off)
Activate/Deactivate automatic GLP monitoring.
GLP alert interval
Number of days until the implementation of the next GLP test.