Metrohm 743 Rancimat - Manual (Page 41)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Operation
743 Rancimat ￭￭￭￭￭￭￭￭ 33
4.2 Instrument and Program Settings
4.2.1 Establishing the instrument communication
Up to four instruments can be controlled with the program 743 Ranci-
mat. Configure the communication between your PC and the 743 Ranci-
mat as follows:
1 Select number of instruments connected
￭ In the Control window, click on the menu item
Options
▶ Communication....
The following dialog window appears:
￭ Enter the number of connected instruments and confirm with
[OK].
The following dialog window appears:
2 Select interface
￭ Under COM port, select the serial interface of the PC to which
the instrument is connected.