Metrohm 743 Rancimat - Manual (Page 73)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Operation
743 Rancimat ￭￭￭￭￭￭￭￭ 65
Evaluate induction time
on | off (Default value: on)
Determination of the induction time (see "Induction time", page 66).
Evaluate stability time
on | off (Default value: off)
Determination of the stability time (see "Stability time", page 67).
Note
If you select this evaluation mode, you always need to calibrate the
conductivity measuring cell beforehand.
Delta Kappa
Conductivity change for the determination of the stability time.
Range 1 ... 400 µS/cm
Options for induction time
Evaluation delay
Waiting time until starting the curve evaluation.