Metrohm 743 Rancimat - Manual (Page 155)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Operation
743 Rancimat ￭￭￭￭￭￭￭￭ 147
2 Enter calibration points of the temperature sensor
￭ Click on the menu item Tools ▶ GLP test ▶ Temperature...
and confirm with [Next >].
The following dialog window appears:
￭ Enter a Sensor name for the temperature sensor.
￭ Under Point 1…3, enter the Temperature and the Resistance
of the calibration point.
￭ Confirm the entry with [Next >].
The following dialog window appears:
3 Enter test parameters
￭ Under Channels used for test, select the required channels.
One channel per block has to be selected at least.
￭ Under Test duration per channel, enter the required test dura-
tion and confirm with [Next >].