Metrohm 820 IC Separation Center - Manual (Page 9)

1.1 Instrument description
819 IC Detector / 820 IC Separation Center
1
1 Introduction
1.1 Instrument description
1.1.1 819 IC Detector
The 819 IC Detector is a conductivity detector especially designed for
ion chromatography with an extensive operating range and high sensi-
tivity for the recording of chromatograms with and without chemical
suppression. The associated thermostattable detector block is normally
installed in the 819 IC Separation Center, but can also be used as a
separate detector. The two following versions are available:
• 2.819.0010 IC Detector with metal detector block
• 2.819.0110 IC Detector with metal-free detector block
The 819 IC Detector can be fully remotely controlled via the Metrohm
«
IC Net» software. All functions can be quickly and easily accessed by
the software and can be clearly shown on the screen. Apart from setting
the measuring parameters, it is possible to draw up any time programs
required. These can be used to control a large number of instrument
functions and freely programmable events.
The 819 IC Detector is connected via the 830 IC Interface or directly to
a PC. The control of the instrument and the recording and evaluation of
the chromatograms take place under «IC Net». It is also possible to
control external devices or start functions in the IC system from these
devices via a “Remote” interface using programmable signals.