Metrohm 820 IC Separation Center - Manual (Page 72)

3 Operation
819 IC Detector / 820 IC Separation Center
64
List of program instructions
The following program instructions can be added to the time program
on the Program page:
Instruction Parameter entry Meaning
ValveA fill, inject Switch injection valve A to “ fill ” or
“ inject ” position.
ValveB fill, inject Switch injection valve B to “ fill ” or
“ inject ” position.
Step Rotate suppressor to the next posi-
tion.
Thermostat
The
Thermostat tab of the 820 IC Separation Center or 820.02X0 IC Separa-
tion Center window contains the temperature control of the column heat-
ing.
Only available for a 2.820.02X0 Separation Center that is connected
either to the 819 IC Detector and installed as 820.02X0 to IC Detec-
tor, or to the 830 IC Interface and installed as 820.02X0 to Interface.
Actual temperature Display of actual temperature within the col-
umn heating in °C.
Set point
Operating temperature of the thermostat
within the column heating in °C.
Entry Range:
10.0 … 80.0 .