Brandmotion 2000-3801 - Manual (Page 9)

Section 3: Buick Verano Instructions, 2012 – Current
2000-3801 Instructions 10-10-12.doc Page 9 of 24
1. Ensure all radio functions are working properly, return
all Treble, Bass, Fade, and Balance to neutral settings,
and remove any CDs to avoid possible jam before
disassembly.
2. For vehicles equipped with automatic transmissions,
place shifter in the N (neutral) position and set parking
brake.
3. Loosen the negative battery cable bolt. Remove
negative battery cable from terminal and position
away from battery.
4. Using a plastic trim tool, gently remove the shifter
surround. (Figure 1)
Figure 1
5. Remove the 2 screws now visible from under the
shifter surround. (Figure 2)
Figure 2
6. Using the plastic trim tool, gently remove the IP and
console trim surround. (Figure 3)
Figure 3
7. Remove lower storage bin from below the HVAC
controls. (Figure 4)
Figure 4
8. Using a 7mm socket driver, remove the 4 bolts
attaching the center radio faceplate unit and remove
it. (Figure 5)
Figure 5