Brandmotion 2000-3801 - Manual (Page 2)

INSTALLATION INSTRUCTIONS
2000-3801 Instructions 10-10-12.doc Page 2 of 24
TABLE OF CONTENTS
Pages
Kit Components 3
Reference Pin Out for DPS Wiring Harness to DPS Turn On Switch 3
Section 1: Buick LaCrosse Instructions 4 - 5
Section 2: Buick Regal Instructions 6 - 8
Section 3: Buick Verano Instructions 9 - 11
Section 4: Chevy Camaro Instructions 12 - 14
Section 5: Chevy Cruze Instructions 15 - 18
Section 6: 2013 Chevy Malibu Instructions 19 - 21
Section 7: Chevy Sonic Instructions 22 - 24
General Preparation:
1. Park vehicle on level ground and secure with tire chucks.
2. Ensure all radio functions are working properly before disassembly.
3. Record any pre-set radio stations if desired since these may be lost when power is
disconnected.
4. Remove any CDs to avoid possible jam.
5. Return all Treble, Bass, Fade, and Balance to neutral setting. The DPS is designed to provide
the best audio experience at the neutral settings. You can, however, adjust them to meet your
desired experience.
6. For vehicles equipped with automatic transmissions, place shifter in the N (neutral) position
and set parking brake.
7. Loosen the negative battery cable bolt. Remove negative battery cable from terminal and
position away from battery.