Brandmotion 2000-3801 - Manual (Page 22)

Section 7: Chevy Sonic Instructions, 2012 - Current
2000-3801 Instructions 10-10-12.doc Page 22 of 24
1. Ensure all radio functions are working properly, return
all Treble, Bass, Fade, and Balance to neutral settings,
and remove any CDs to avoid possible jam before
disassembly.
2. For vehicles equipped with automatic transmissions,
place shifter in N (neutral) position and set parking
brake.
3. Loosen the negative battery cable bolt. Remove
negative battery cable from terminal and position
away from battery.
4. Using the plastic trim tool gently remove IP center
trim. (Figure 1)
Figure 1
5. Using a 7mm socket driver, remove 4 bolts attaching
the radio head unit. (Figure 2)
Figure 2
6. Pull out the radio head and disconnect the 44-pin
connector from the back of the radio. (Figure 3)
Figure 3
7. With the radio head unit pulled out of the way, drop
the white connectors of DPS harness though the
opening behind radio cavity on the left side and pull
through from underneath the dash. (Figure 4)
Figure 4
8. Connect the male 44-pin connector from the DPS
harness to the vehicles harness. (Figure 5)
Figure 5