Brandmotion 2000-3801 - Manual (Page 10)

Section 3: Buick Verano Instructions, 2012 – Current
2000-3801 Instructions 10-10-12.doc Page 10 of 24
9. Using a 7mm socket driver, remove 2 bolts attaching
upper display screen, and remove display to gain
access to radio head unit. (Figure 6)
Figure 6
10. Using a 7mm socket driver, remove 4 bolts attaching
radio head unit. (Figure 7)
Figure 7
11. Pull out the radio head and disconnect the 44-pin
connector from the back of the radio. (Figure 8)
Figure 8
12. With the radio head unit pulled out of the way,
drop the white connectors of the DPS harness
though the opening behind radio cavity. Remove
the console side panel, and pull harness through
from underneath the dash on passenger side.
13. Connect the male 44-pin connector from the DPS
harness to the vehicles harness. (Figure 9)
Figure 9
14. Connect the female end of the 44-pin connector
from the DPS harness to the back of the radio head
unit. (Figure 10)
Figure 10
15. Connect the two white connectors of the DPS
harness to the DPS module. (Figure 11)
Figure 11