Brandmotion 2000-3801 - Manual (Page 19)

Section 6: 2013 Chevy Malibu Instructions
2000-3801 Instructions 10-10-12.doc Page 19 of 24
1. Ensure all radio functions are working properly,
return all Treble, Bass, Fade, and Balance to neutral
settings and, remove any CDs to avoid possible jam
before disassembly.
2. For vehicles equipped with automatic transmissions,
place shifter in the N (neutral) position and set parking
brake.
3. Loosen the negative battery cable bolt. Remove
negative battery cable from terminal and position away
from battery.
4. Using a plastic trim tool, gently separate the chrome
shifter bezel from the surrounding bezel. (Figure 1)
Figure 1
5. Using the plastic trim tool gently remove the IP
center trim. (Figure 2)
Figure 2
6. Carefully remove the IP center trim panel by slide
the shifter bezel through the trim opening. (Figure 3)
Figure 3
7. Using a 7mm socket driver, remove the 4 bolts
attaching the HVAC and radio control faceplates. (Figure
4)
Figure 4
8. Flip up the display screen and remove both the
HVAC and radio faceplates starting with the HVAC.
(Figure 5)
Figure 5