Brandmotion 2000-3801 - Manual (Page 12)

Section 4: Chevy Camaro Instructions, 2010 - Current
2000-3801 Instructions 10-10-12.doc Page 12 of 24
1. Ensure all radio functions are working properly, return
all Treble, Bass, Fade, and Balance to neutral settings,
and remove any CDs to avoid possible jam before
disassembly.
2. For vehicles equipped with automatic transmissions,
place shifter in the N (neutral) position and set parking
brake.
3. Loosen the negative battery cable bolt. Remove
negative battery cable from terminal and position
away from battery.
4. Using a plastic trim tool, gently remove the lower
console trim. (Figure 1)
Figure 1
5. Using a 7mm socket driver remove the 2 bolts under
the HVAC controls. (Figure 2)
Figure 2
6. Using the plastic trim tool, gently remove the IP face
plate controls (Figure 3)
Figure 3
7. Using a 7mm socket driver, remove the 4 bolts
attaching the radio head unit. (Figure 4)
Figure 4
8. Pull out the radio head and disconnect the 44-pin
connector from the back of the radio. (Figure 5)
Figure 5