Brandmotion 2000-3801 - Manual (Page 13)

Section 4: Chevy Camaro Instructions, 2010 - Current
2000-3801 Instructions 10-10-12.doc Page 13 of 24
9. With the radio head unit pulled out of the way,
drop the white connectors of the DPS harness
though the opening behind radio cavity on the left
side. Pull harness through from underneath the
dash. (Figure 6)
Figure 6
10. Connect the male 44-pin connector from the DPS
harness to the vehicle’s harness. (Figure 7)
Figure 7
11. Connect the female end of the 44-pin connector
from the DPS harness to the back of the radio head
unit. (Figure 8)
Figure 8
12. Connect the two white connectors of the DPS
harness to the DPS module. (Figure 9)
Figure 9
13. Connect the DPS turn-on switch to the remaining
connector on the DPS harness. (Figure 10)
Figure 10