Brandmotion 2000-3801 - Manual (Page 20)

Section 6: 2013 Chevy Malibu Instructions
2000-3801 Instructions 10-10-12.doc Page 20 of 24
9. Using a 7mm socket driver remove the 4 bolts
attaching the radio head unit. (Figure 6)
Figure 6
10. Pull out the radio head and disconnect the 44-pin
connector from the back of the radio. (Figure 7)
Figure 7
11. With the radio head unit pulled out of the way, drop
the white connectors of the DPS harness though the
opening behind radio cavity on the left side and pull
through from underneath the dash. (Figure 8)
Figure 8
12. Connect the male 44-pin connector from the DPS
harness to the vehicles harness. (Figure 9)
Figure 9
13. Connect the female end of the 44-pin connector
from the DPS harness to the back of the radio head unit.
(Figure 10)
Figure 10
14. Connect the two white connectors of the DPS
harness to the DPS module. (Figure 11)
Figure 11