7 scroll from master machine, 8 serial multibutton controller, 9 two button serial controller – Autocue WinCue Pro News Version 1.3 User Manual
Page 93

WinCue Pro News User Guide
Scroll Controls
• 93
8.7
Scroll From Master Machine
This setting is used when you are using the Master Slave system.
See the Master/Slave section.
8.8
Serial Multibutton Controller
This hand control should not be used with WinCue Pro News.
8.9
Two Button Serial Controller
This hand control should not be used with WinCue Pro News.
The simple serial scroll control is connected to a free serial communication port. In
Standard Configuration the simple serial scroll control allows you to scroll the
prompted text up and down the screen and jump between markers.