Autocue WinCue Pro News Version 1.3 - Manual (Page 10)

WinCue Pro News User Guide WinCue Pro News Installation • 10
1.1 Hardware Requirements
WinCue Pro News will run on the Windows 95, 98, Windows NT4 and Windows 2000
operating systems; the minimum hardware requirements and recommended
specifications are as follows:
Windows 95/98
• 133MHz Pentium processor (200MHz Pentium or better is recommended)
• 16MB RAM (32MB RAM is recommended)
• 50MB free disk space
• Adaptec SCSI card 2906 for desktop, Adaptec 1460 SlimSCSI PCMCIA
card for laptop
• PCI or AGP graphics card (AGP preferred)
• 1024x768 16 bit High Colour is recommended
Windows NT 4.0
• 166MHz Pentium processor (200MHz Pentium or better is recommended)
• 32MB RAM (128MB RAM is recommended)
• 50MB free disk space
• Adaptec SCSI card 2906 for desktop, Adaptec 1460 Slim SCSI PCMCIA
card for laptop
• PCI or AGP graphics card (AGP preferred)
• 1024x768 16 bit High Colour is recommended
Windows 2000
• 166MHz Pentium processor (200MHz Pentium or better is recommended)
• 64MB RAM (128MB RAM is recommended)
• 50MB free disk space
• Adaptec SCSI card 2906 for desktop, Adaptec 1460 Slim SCSI PCMCIA
card for laptop
• PCI or AGP graphics card (AGP preferred)
• 1024x768 16 bit High Colour is recommended
Note: IMT Card must have Version 2 ROMs fitted and must use builds 589 or above.