Autocue QMaster User Manual

Page 9

QMaster-UserGuide.docx 2011-08-11

Note: It is recommended that the licence dongle is always inserted into the same USB port.

Depending on the hardware and software configuration of your computer, it may be

necessary to re-install the Sentinel drivers for each USB port.

When you start QMaster for the first time you will be prompted to configure the connection to your QBox. A

connection wizard will guide you through this process.

1. The dialog box below will be displayed. Press Next if you wish to configure the

connection.

12. Enter the name of your QBox.

The default value is the QBox hostname based on the serial number of the device
you have.

Note: The serial number is shown on the printed label attached to the bottom of your

QBox.

13. Enter the IP address of your QBox.