Autocue QMaster - Manual (Page 50)

QMaster-UserGuide.docx 2011-08-11
50 © 2003-2011 Autocue Group Ltd.
Select the port you wish to connect your caption generator to from the drop down list in the Serial Port panel.
Specify the Baud Rate for that connection from the drop-down list in the Baud Rate panel.
In the other four panels set the parameters to define the type of ―error correction‖ the interface will use. This
allows the caption generator to continually check to make sure it is receiving valid data.
Prompt Settings
Settings
Use these parameters on this tab to define actions that you want to occur when working with a QBox.
Parameter Description
Show Prompt Monitor on
Prompt This automatically opens the onscreen Prompt
Monitor whenever you start a prompting session.
Click Size & Position to specify how big you want
the Prompt Monitor to be and where on your
screen you want it located.
QMaster will set a size that maintains the 4:3
aspect ratio that is closest to the size you draw.
The maximum width is set to one-third of your
screen width.
Check for Reconnect on
Open
When you start the QMaster software, it will
search the network for any configured QBoxes.
Display Markers on Prompt
Output
The default setting is to not display markers on the
teleprompters. Select this option if you wish to
show markers on screen.