Autocue QMaster - Manual (Page 43)

QMaster-UserGuide.docx 2011-08-11
43 © 2003-2011 Autocue Group Ltd.
70. To add a new controller to the VSB click Add and enter the required details.
71. Each type of device you add to the Virtual Spider Box can be configured using the
procedures described above.
72. If you want to modify or delete an existing serial controller associated with the VSB,
click the appropriate button.
73. Select the required mode of operation.
The most common mode is Active Controller Wins which means that the controller
currently active has control of prompting. If none are being used, the first to be
operated takes control.
74. Click OK
75. Click OK on the QMaster Configuration dialog to save the changes.
Other QMaster configuration options
After you have installed QMaster you can configure the parameters that apply to the general operation of
the software. This chapter provides an outline of the steps to take to set the parameters so that QMaster
performs to your requirements.
Open the QMaster Configuration interface by selecting Tools >> Options from the menu bar.