Rockwell Automation T8160 Trusted TMR Interface - Manual (Page 53)

Trusted TM TMR Module T8160
Issue 13 May 13 PD-T8160 53
4.31. I/O Complex Equipment ‘SX7464’
Description: T7464 AC Guarded Digital Output Module 110V ac. The AC Guarded Digital Output
Module provides digitally switched outputs for controlling 16 field loads. The 110V ac
digital output circuits are ‘sourcing’ outputs that switch field power ranging from 90V ac
to 130V ac. Field power for the outputs is arranged in two isolated groups of 8 points.
This board definition is used in a simplex configuration.
Product Description reference: PD-T7021 AC Guarded Digital Output Module 110V ac
OEM PARAMETERS:
OEM parameter Valid numbers Description
TICS_CHASSIS
TICS_SLOT 1 – 10
1 – 8 (Chassis 1)
1 – 12 (Expander
Chassis) The TICS chassis & slot number where the TMR Interface
module is placed
REGENT_CHASSIS
REGENT_SLOT 1 – 16
1 – 10 The chassis & slot number within the Regent+Plus I/O where the
Module is placed.
CONFIGURATION
PHYSICAL MODULE:
RACK 1: 16 BOOLEAN outputs States to be written to the module identified by the OEM parameters.
Channel 1 is module channel 1 and Channel 16 is module channel 16.
TRUE – channel high, FALSE – channel low
RACK 2: 1 BOOLEAN input Input reflecting the board status of the module.
FALSE – board ok, TRUE – board fault
Notes:
5. All parameters must be supplied, even for virtual boards.
6. Trusted TM chassis and slot numbers start at 1, Regent+Plus I/O chassis and slot numbers
start at 1.