Alarm parameters – Rockwell Automation 1440-PK02-05M2 XM-720 Machine Monitor User Manual
Page 46
Publication GMSI10-UM001C-EN-E - June 2011
46 Configuring the XM-720
To modify the gSE parameters, follow these steps.
1. In the XM-122 Configuration Tool, click the gSE tab. You will see a
screen similar to this.
2. Enter or select the desired parameters to configure the gSE
measurement.
3. When you are finished, choose Device > Download to Device to
download your changes to the XM module.
Alarm Parameters
Use the Alarm, Relay and 4-20 mA Output tab in the Configuration Tool to
select the type of measurement that is associated with an alarm and to set the
alert and danger threshold values.
In the provided configuration files, alarm number 1 and 2 have been
configured for you. Both alarms are configured identically except that Alarm
Number 1 is set up to monitor Ch 1 overall and Alarm Number 2 is set up to
TIP
Refer to Chapter 3 in the XM Module User Guide
for a detailed description of the configuration
parameters.
TIP
Press F1 to display the online help topic for the
current tab or dialog.