Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 63)

5–2 Introduction to AUX Terminal Configuration
Publication 2755-833
After connecting the terminal to the decoder and setting the
communication parameters, you can start using the configuration
menus.
1. Power on the terminal or computer and load communications
software (if required).
2. Power on the decoder. The POWER and CPU ACTIVE indicators
light.
3. The Select Language screen displays:
If the Select Language screen does not appear, press [Esc]. If the
Select Language screen still does not appear, check your
communication parameters to be certain they match those listed
earlier in this chapter. Also, be sure the COM port selected in
your communications software matches the COM port to which
the decoder is connected. See Appendix D for information on
selecting a COM port.
Important: If you are unable to access the configuration screens,
the AUX port may be set for manual data entry mode. See
Chapter 13 for details on how to switch to configuration mode.
Getting Started