Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 15)

1–2 Using this Manual
Publication 2755-833
This manual describes how to install and use all versions of the
decoder. The general contents of each chapter are:
Chapter Title Purpose
1 Using this Manual Provides an overview of the manual.
2 Decoder Features
Describes the main features of the NEMA
Type 1 and Type 4 decoders.
3
Overview of
Decoder Operations
Gives an overview of decoder operations,
including configuration options, host vs.
stand–alone operation, and decoding
capabilities.
4
Installing the Decoder
and Quick Start
Describes how to install the decoder and
supporting equipment.
5
Introduction to AUX
Terminal Configuration
Provides an overview of the concepts which
must be understood in order to use the
decoder configuration software.
6
Configuration:
Symbology
Explains how to use the configuration
software to set symbology-related variables.
7
Configuration:
Scanner Control, Primary
Match Table, Discrete I/O
Explains how to use the configuration
software to set up scanner(s), define match
code strings, and control discrete I/O
functions.
8
Configuration:
Extended Match Table
and Counters
Explains how to use the configuration
software to set up and use the decoders
advanced extended match code capabilities.
9
Configuration:
Display Parameters
Explains how to use the configuration
software to enable and format the display of
various types of data on the AUX terminal or
optional LCD screen.
10
Configuration:
Host Message
Replacement Rules
Explains how to use the configuration
software to further control decoder operations
and output with host message replacement
rules.
11
Configuration:
Host Message Format
Explains how to use the configuration
software to format bar code data sent to the
host.
12
Configuration:
Host Communications
Explains how to use the configuration
software to configure HOST port
communications.
13
Configuration:
AUX Terminal Data Entry
Explains how to use the AUX terminal for
manual data entry and display functions.
14
Display & System
Configuration
Explains how to use the configuration
software to display data and counters, and
perform a number of system-level activities.
15
ASCII
Host Commands
Defines ASCII commands you can send from
a host device to configure and control
decoder operations.
16
PCCC
Host Commands
Defines PCCC commands you can send from
a host device to configure and control
decoder operations.
17
Maintenance
and Troubleshooting
Provides information on troubleshooting and
maintaining the decoder.
18 Specifications Lists specifications of the decoder.
Appendices, Glossary, Index
Contents of Manual