Rockwell Automation 1798-IB4 FlexArmor User Manual - Manual (Page 5)

1 Publication 1798-UM001B-EN-P - November 2002
Preface
Introduction Use this manual to install, communicate with, map, configure, and
troubleshoot the FlexArmor system.
Contents You will find the following information in this manual:
Audience This manual is intended for engineers and technicians who are
installing, programming, and maintaining a FlexArmor system.
What We assume We assume you:
•
know each of your device’s I/O parameters and requirements
•
are familiar with RSNetWorx for DeviceNet™
•
are familiar with the Microsoft
®
Windows
®
environment
Common Techniques Used
in This Manual The following conventions are used throughout this manual:
•
Bulleted lists provide information, not procedural steps.
•
Numbered lists provide sequential steps.
•
Pictures of keys and/or screens represent the actual keys you
press or the screens you use.
•
Actions you must perform appear in bold text. For example:
Click View to display the EDS file.
For information about See
installing your DeviceNet adapter module Chapter 1
how communication takes place and I/O image mapping Chapter 2
how to configure your DeviceNet adapter Chapter 3
troubleshooting Chapter 4
module specifications Appendix A