Rockwell Automation 1798-IB4 FlexArmor User Manual - Manual (Page 34)

Publication 1798-UM001B-EN-P - November 2002
3-6 Configure Your DeviceNet Adapter
Configure the Module
1. Click the Module Configuration tab.
2. Click Upload.
Use the following functions, as needed, to configure the
module.
IMPORTANT
You must be online to perform an upload.
List of available
hardware. Add to
the current network
by selecting the
hardware and
clicking the arrow to
the right.
Modules identified
by slot number.
Upload data for the
entire chassis. You must
be on line to perform
this function.
Use these icons to move the
selected module to the next
empty slot in the chassis.
Delete the module at the selected slot.
Change to Display
Hardware By
Product Name or
by Catalog
Number
Configure the
module at the
selected slot.
(Note: You can
also configure the
module by double
clicking on it.)
Download data for
the entire chassis.
You must be on line
to perform this
function.
IMPORTANT
Downloading to the adapter is an option only when
the 1798-ADN is not in the master’s scanlist.
IMPORTANT
If you attempt to download when the adapter is in a
scanlist, you will receive an object state conflict error
message.