Rockwell Automation 1798-IB4 FlexArmor User Manual - Manual (Page 31)

Publication 1798-UM001B-EN-P - November 2002
Configure Your DeviceNet Adapter 3-3
Configure Your FlexArmor
Adapter and System Online To configure your adapter:
1. Open RSNetWorx for DeviceNet.
2. Click the Online icon . (If you are working off line, skip to
the next section to learn how to configure the adapter.)
You see the Browse for Network window.
3. Locate the network you wish to access.
4. Click OK.
You are now in Online mode.
5. Click the Browse for Network icon .