Rockwell Automation 1798-IB4 FlexArmor User Manual - Manual (Page 29)

1 Publication 1798-UM001B-EN-P - November 2002
Chapter
3
Configure Your DeviceNet Adapter
Chapter Objectives In this chapter, you will learn how to use RSNetWorx for DeviceNet
software to configure the adapter. You will:
•
learn briefly about RSNetWorx for DeviceNet
•
configure your FlexArmor adapter and system online
•
map the scanner
Configure Your Adapter’s FlexArmor System
Configure your FlexArmor system by specifying the FlexArmor
module that will reside in each slot. Remember, slot 0 is the closet slot
to the adapter and slot 7 is the farthest or last slot.