Rockwell Automation 1798-IB4 FlexArmor User Manual - Manual (Page 30)

Publication 1798-UM001B-EN-P - November 2002
3-2 Configure Your DeviceNet Adapter
About RSNetWorx
for DeviceNet RSNetWorx for DeviceNet is the software tool used to configure your
FlexArmor DeviceNet adapter and its related modules. This software
tool can be connected to the adapter via the DeviceNet network.
In this chapter, we assume that you have established a network, and
are adding a FlexArmor Adapter to your network.
If you are working off line, drag and drop the devices from the
hardware list onto the graph.
IMPORTANT
You will be able to perform most of the functions
discussed in this section while working off line but
you must be on line to perform all of the functions
discussed in this chapter.
hardware
list
graph