Rockwell Automation 2755 Decoded Hand-Held Scanner - Manual (Page 80)

Chapter
4
Publication 2755-6.5
IBM Keyboard Wedge
(Communication Setup)
This chapter provides the configuration bar codes for the IBM Keyboard
Wedge Synapse cables:
•
(Catalog No. 2755-HFC-SP1-01)
•
(Catalog No. 2755-HFC-SP2-01)
IBM Keyboard Wedge Synapse Cable Defaults
Scan the following bar code to set the IBM Keyboard Wedge Cables to
their default values. Defaults are indicated with an asterisk *.
Set PC Wedge Synapse Cable Defaults
Scan this label to set the IBM PC Wedge Synapse cable to the default
settings shown below.
Item Default Setting
Code on
Page:
Host
IBM PC/AT
IBM PS/2-50, 55SX, 60, 70, 80
4-2
Country North American 4-3
Bar Codes with Unknown
Characters
Send Bar Codes With Unknown Characters 4-4
Intercharacter Delay 5 milliseconds 4-4
Parameter Set Parameter Set 1 4-5
Scan the bar code symbols for the settings you need to change.