Rockwell Automation 2755 Decoded Hand-Held Scanner - Manual (Page 136)

DTAM t Plus DeviceNet t Application F–3
Publication 2755-6.5
Codes for DTAM Plus Operator Interface DeviceNet Application
1. After making the necessary connections, scan the following following
bar code symbols to setup the scanner for use with the scanner
emulation cable.
Scan this Symbol First
then
Set Scanner for Synapse Cable Operation
Enable Synapse Cable Communication
2. Set the bar code suffix to CR LF (ASCII equivalent 7013) by
scanning the following labels.
Suffix
7 0
1 3