Rockwell Automation 2755 Decoded Hand-Held Scanner - Manual (Page 32)

Scanner Configuration (for Synapse Cables) 1-21
Publication 2755-6.5
Transmit AIM ID Character
Do Not Transmit AIM ID Character*
Transmit AIM ID Character
Audible Response
Beep After Decode*
Do Not Beep After Decode
Power Mode
Continuous On*
Low Power
Note: When the scanner is in low power mode and a label is scanned,
the first character of the first symbol scanned will not be read as the
scanner powers up. Use continuous mode if this causes a problem with
your application (such as stand mode or A-B Basic Module applications).