Rockwell Automation 1771-QDC, D17716.5.85(Passport) MNL. PLASTIC MOLDING MODULE - Manual (Page 33)

System Operation:
Inject Mode 0 0
Select Units
0 = English
1 = metric
Code:
Your value
Required initial value
loaded by ProĆSet 600
0 or 1
Configure the QDC Module's I/O
Chapter 3
3-2
Worksheet 3ĆA
Select Module Parameters
Control Word MCC02ĆBxx 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
ProĆSet 600 Addr. B34/bit 543 542 541 540 539 538 537 536 535 534 533 532 531 530 529 528
Value 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0
Example: If you select Inject operation with English units:
MCC02 = 00000000 00001000
Select I/O Ranges for your Sensors
Next, configure the QDC module’s I/O ranges to match the machine
sensors and valves. Refer to Worksheet 2-A from chapter 2 which you
filled out when setting the QDC module’s jumpers. Apply this information
to Worksheet 3-B for input ranges and Worksheet 3-C for output ranges.