Rockwell Automation 1771-QDC, D17716.5.85(Passport) MNL. PLASTIC MOLDING MODULE - Manual (Page 174)

Enter Your SWTL Configuration Values Here
Enter Your Alarm and TimeĆdelay Values Here
Blank Worksheets
Appendix A
A-5
Worksheet 3ĆF
SWTL Configuration Values
Control Word ProĆSet 600 Addr. Value Description Units
MCC13 N40:9 Screw Minimum SWTL Screw Axis Measured from zero 1
MCC14 N40:10 Screw Maximum SWTL Screw Axis Measured from zero 1
MCC15 N40:11 10 Screw SWTL Deadband As noted 1
1 Incremental Distance
00.00 to 99.99in
000.0 to 999.9mm
Worksheet 3ĆG
Alarm and TimeĆdelay Setpoints
Control Word ProĆSet 600 Addr. Value Description Units
MCC21 N40:17 Screw PressureĆalarm Setpoint Ram (screw) Pressure 2
MCC22 N40:18 ScrewĆpressure TimeĆdelay Setpoint Time Measured in Seconds 1
MCC55 N40:51 HighĆRPM Alarm Setpoint Rotational Speed 3
MCC56 N40:52 Screw RPM TimeĆdelay Setpoint Time Measured in Seconds 1
MCC61 N40:57 Cavity PressureĆalarm Setpoint Cavity Pressure 4
MCC62 N40:58 CavityĆpressure TimeĆdelay Setpoint Time Measured in Seconds 1
1 Time Measured in Seconds 2 Pressure 3 Rotational Speed 4 Pressure
00.00 to 00.99 0000 to 9999 PSI 000.0 to 999.9 RPM 00000 to 20,000 PSI
000.0 to 999.9 Bar 0000.0 to 2000.0 Bar