Rockwell Automation 1413-CAP-ME-PE Capacitor Bank Controller, Series C - Manual (Page 65)

Rockwell Automation Publication 1413-UM001D-EN-P - November 2010 65
Chapter
5
SCADA Interface
Power-circuit Parameters The capacitor bank controller reads power-circuit parameters from the
PowerMonitor meters and makes that data available in its data table for use by
other applications such as SCADA or HMI systems.
This table lists the PowerMonitor meter data available in the controller. The
symbol x indicates the PowerMonitor meter number. Addresses related to
PowerMonitor meter no. 1 begin with F11:0, addresses related to PowerMonitor
meter no. 2 begin with F12:0.
Table 14 - Available PowerMonitor Meter Data
Address Parameter
F1x:0 L1 Current
F1x:1 L2 Current
F1x:2 L3 Current
F1x:3 L1-L2 Voltage
F1x:4 L2-L3 Voltage
F1x:5 L3-L1 Voltage
F1x:6 Frequency
F1x:7 L1 Real Power
F1x:8 L2 Real Power
F1x:9 L3 Real Power
F1x:10 Total Real Power
F1x:11 L1 Reactive Power
F1x:12 L2 Reactive Power
F1x:13 L3 Reactive Power
F1x:14 Total Reactive Power
F1x:15 L1 Power Factor
F1x:16 L2 Power Factor
F1x:17 L3 Power Factor
F1x:18 Total Power Factor