Rockwell Automation 7000 DPI Wireless Interface Module - Manual (Page 70)

C-8 Wireless Flash Updating DPI Devices
Figure C.14 ControlFLASH Setup Complete Screen
3. Establish wireless communication between the WIM and the desktop
or laptop computer. For this procedure, refer to Using DriveExplorer/
DriveExplorer Liten page 3-10 .
4. With the DriveExplorer linear list screen ( Figure C.15 ) displayed,
click on the device to be flash updated (for this example, a
PowerFlex 70 drive).
Figure C.15 DriveExplorer Linear List Screen
5. Select Explore > Device Properties… to display the device’s
information screen. Then click the Details tab to show a screen
(
Figure C.16 ) with the device’s firmware revision information.