Rockwell Automation 7000 DPI Wireless Interface Module - Manual (Page 66)

C-4 Wireless Flash Updating DPI Devices
5. Establish wireless communication between the WIM and Pocket PC.
For this procedure, refer to Using Pocket DriveExplorer for Pocket
PCn page 3-2 .
6. With the StatusMonitor screen ( Figure C.5 ) for the drive displayed,
select Tasks > Flash Update to open the DeviceFlash screen
(
Figure C.6 ).
7. In the Available Updates list, select the appropriate firmware version
(for this example, 2.007.123). Then tap Next to continue. The flash
update warning screen (
Figure C.7 ) appears.
Figure C.7 DeviceFlash Update Warning Screen
Figure C.5 Drive StatusMonitor Screen Figure C.6 DeviceFlash Screen