Rockwell Automation 7000 DPI Wireless Interface Module - Manual (Page 26)

3-4 Configuring the WIM
20-COMM-E adapter). If you select “Remote,” disregard Step 5
and instead go directly to Step 10 on
Page 3-6 and perform
sub-steps A through D. Step 10 must be performed before
proceeding with Step 6 below.
Figure 3.4 Local Connection Screen
5. Enter a desired connection name and tap Next ->. The “Connection
Summary” screen ( Figure 3.5 ) appears.
Figure 3.5 Connection Summary Screen
6. You can save the connection information and connect immediately,
or save the connection for connecting later.
After making a selection, the “Location for saved connection” screen
(
Figure 3.6 ) appears, enabling you to navigate to a desired location
on the Pocket PC to store connections.