Talos Security IPC311-W 720P Manual - Manual (Page 62)

IP Camera User’s Manual
|
1) Fixed IP mode;
2) Broadband and router sharing Internet access mode (dynamic obtainment of extranet IP address
mode) like ADSL and so on;
3) PPPoE dial-up access.
After IP camera is connected to Internet, remote Internet users can visit it directly via domain
name or IP address.
 Fixed IP mode
See below picture for the network topology:
Fig 89
Please refer to below picture for the network settings:
Fig 90
Setup steps:
Step 1: Log in IP camera via crossover cable direct connection.
Step 2: Switch to the page [Network Configure], fill in the device IP address requested from network
service provider, e.g. 113.108.119.168;
Step 3: enter correct subnet mask, e.g. 255.255.255.0;
Step 4: enter correct gateway, e.g. 113.108.119.20;
After setup completes, click [Set] and restart the device, then connect it to public network so that
all Internet users can visit the IP camera remotely via entering http://113.108.119.168 to IE browser.