Talos Security IPC311-W 720P Manual - Manual (Page 59)

IP Camera User’s Manual
|
Fig 83
Enabled: tick off;
Domain: enter the host name you created at no-ip.com; such as MyIPC.no-ip.org;
User Name: the account you created at no-ip.com;
Password: the password of your account at no-ip.com;
DDNS type: choose NO IP;
Click Set button to save the setting.
Enter into configuration interface of the router to map the server port and IP address (if the user
enables UPnP function of device and router, he can skip this step).
Note: Please allow a little time for the DDNS service to update with your new DDNS
address. This is normal for the DDNS system.
4. Accessing your IP Camera remotely.
Open Internet Explorer and enter the host name (e.g. http://MyIPC.no-ip.org) in the address bar
to access it.
Note: Please refer to the user manual for other detailed operation.
Appendix 5 Visit IP camera under different network
environments
You can visit IP camera with your PC via LAN or WAN, the following contents will tell you how to
use IP camera under different network environments.
1. LAN
There are two ways to connect IP camera to LAN: static IP and dynamic IP