Talos Security IPC311-W 720P Manual - Manual (Page 14)

IP Camera User’s Manual
|
Click button to save the setting; when the setting is not saved, click
button to return to the previously saved parameters; when the setting has been saved, click
button to query whether the setting is successful.
Note: After revise and save parameters, the device will restart. If it is
applied in LAN, please pay attention to avoid conflict between its IP address and
the IP addresses of other devices or PC in the LAN.
5.3 Time Parameters
The interface of time parameters is shown in Fig 12:
Fig 12
[Time Setting]: Manually set the system date and time of device.
[NTP Server]: After enable this function, user can choose the proper time zone, set the NTP IP and
NTP port, and IP Camera will proofread system time to NTP server according to the settings.
[Sync PC time]: Click button, the date and time of IP camera will be synchronized with
the PC.
Click button to save the setting; when the setting is not saved, click
button to return to the previously saved parameters; when the setting has been saved, click
button to query whether the setting is successful.