Talos Security IPC311-W 720P Manual - Manual (Page 3)

IP Camera User’s Manual
Statement:
 Contents in this manual may be different from the edition that you are using. There may be
technical inaccuracies, or typographical errors in the manual.
 Should any unsolved problem occur given that the product is used according to this manual,
please contact our technical support department or your product suppliers.
 The content of this manual may be updated at irregular intervals without prior notice.
Audience:
This manual is suitable for engineers as follow:
 System planning person
 Technical support and maintenance person
 Administrator
 User
Convention
Conventions are as follows in this manual:
 “IP Camera” mentioned in this manual refers to network camera, including box IP camera, dome
IP camera, infrared box IP camera, speed dome IP camera, etc.
 Click: Press the left mouse button once.
 Double-click: Press the left mouse button twice.
 “[ ]”: Option name, Window name, menu name and datasheet.
Caution
 This device should be operated only from the type of power source indicated on the marking label.
The voltage of the power must be verified before using. Kindly remove the cables from the power
source if the device is not to be used for a long period of time.
 Do not let this product fall to the ground or against the strong percussion.
 Do not directly touch the optical components of image sensor. If necessary, place a clean cloth
with alcohol slightly moist and gently wipe the dust. If the device is not to be used, please cover it
with dust cover to protect the image sensor.
 Avoid aligning strong light (such as lighting, sunlight, etc.) focus, otherwise it will easily lead to
image too bright or pulling light (this is not a camera malfunction), and it will affect the service life
of image sensor.
 Do not expose the machine in moist, dusty, extremely hot, extremely cold and strong
electromagnetic radiation environment. (Normal work temperature: -10 ℃ ~ +55 ℃)
 Avoid water or other liquid flowing into the camera in use. In case any solid or liquid get inside the
machine, user must cut off the power supply immediately, and get it checked by a qualified
technician.