Talos Security IPC311-W 720P Manual - Manual (Page 23)

IP Camera User’s Manual
|
[Capture Pictures]: Set the amount of linkage capture after being triggered, the number of pictures
snapped is from 1 to 10. If the number is set as 10, and the snapping interval is 1 second, that means
when there is an alarm, 10 pictures will be snapped at one time and the interval between each picture
is 1 second.
[E-mail]: Enable E-mail function; when I/O alarm is trigged, a notification email will be sent to user’s
designed email box including trigger events, time, capture pictures, and device name, etc. User can
select only sending text messages or sending text and image messages.
Details about E-mail setting please refer to [E-mail Configure].
[FTP]: Enable FTP function; when I/O alarm is trigged, the information of I/O alarm will be saved in the
way of FTP uploading. User can select only sending text messages or sending text and image
messages.
[Alarm Sound]: Close or open the alarm ringing.
[Ring Duration Time(s)]: After opening the alarm ringing, set the duration of alarm ringing after
being triggered (in seconds), the range of alarm ringing is 1~10s.
Click button to save the setting; when the setting is not saved, click
button to return to the previously saved parameters; when the setting has been saved, click
button to query whether the setting is successful.
5.10 Advanced Configure
5.10.1 Capture Configure
The interface of capture configure is shown in Fig 20:
Fig 20